I just landed on my 3rd - Gleba. Vulcanus and Fulgora are “good enough” for now. Once I have Gleba science up and running, I’ll migrate to a bigger Nauvis base, because my starter base is bottlenecked by copper throughput with no easy way of increasing it.

When this group of people on discord are online: Helldivers 2. It’s a nice way of killing time while chitchatting.

When not: Factorio with the recently release Space Age expansion. Absolutely loving it.

Previous job: Windows, because it was a company issued laptop. Plus a lot of the company was built around the MS ecosystem.

Current job: Linux, because I got to keep the perfectly decent Dell laptop when I left. I wanted to make sure I purged everything, so it’s running LMDE now. Plus, there’s not much outlook and teams stuff that I have to use.

I blame Daniel

Some surface-level info while I’m waiting for my kids to finish the evening ritual: No need for an extra IP or VPS. You can host them all on the same IP and machine, provided there aren’t any conflicting port assignments.

In the DNS server, you can enter the various subdomains as CNAME pointing to the A record. The server-software is configured with which hostname it should operate as (For example, HTTP/1.1 has a Host-specification in the initial request, so that one server can host multiple domains on the same IP)

It should be noted that mail servers are indicated by an MX-record. And mailservers should also have a TXT record (SPF record) as part of spam prevention - some SMTP servers query this to ensure that your e-mail actually comes from you and not from someone spoofing the domain.

I used to have a zone file that did roughly what you’re trying to do, bit sadly I don’t have it anymore. But as you have DNS up and running, I’m sure you’ll be able to figure out the rest through checking some examples.

I half-baked an example zone file for you. I haven’t tested it, though. It assumes the domain of blargh.com being hosted from an IP of 123.123.123.123:

$TTL 86400
@    IN    SOA   ns1.blargh.com. admin.blargh.com. (
                2024102102 ; Serial (incremented)
                3600       ; Refresh
                1800       ; Retry
                1209600    ; Expire
                86400      ; Minimum TTL
)

; Name servers
@    IN    NS    ns1.blargh.com.
@    IN    NS    ns2.blargh.com.

; A Records
@            IN    A      123.123.123.123
ns1          IN    A      123.123.123.123
ns2          IN    A      123.123.123.123

; CNAME Records
mail         IN    CNAME  blargh.com.
mastodon     IN    CNAME  blargh.com.
matrix       IN    CNAME  blargh.com.

; MX Records
@            IN    MX     10 mail.blargh.com.

; TXT/SPF Record
@            IN    TXT    "v=spf1 mx ~all"

Oh, and some tips:

• Do not enable SMTP-relay on your SMTP server. This opens you up to abuse, and you (probably) don’t need it.
• Your DNS server should only talk to strangers about queries about your domain. Otherwise you might be part of a DNS amplification attack.
• I have a personal preference for imap.blargh.com or pop3.blargh.com, combined with smtp.blargh.com, as it makes it easier to deduct the protocol, if you’re not supporting imap and pop3. I don’t think anyone else but me care, though.

My hardware is. But I suspect the linux support is lacking in MSFS24.

In my book WSL and VM share the same downside in that you’re only abstracting Linux functionality in relation to the hardware.

Linux really shines when it has full access to the actual hardware as opposed to asking it’s environment nicely if it’s allowed to do something.

For example, I routinely need to change my IP address to talk to specific networks and network hosts, but having to step over the virtualisation or interpretation layer to do so is just another step, thus removing the advantage of running linux in the first place.

Sure, VMs and dual booting have their uses, but the same uses can be serviced by an actual linux install while also being infinitely more powerful.

I played around with WSL for a while, but you notice really quickly that it is not the real thing. I’ve used virtual box for some use cases, but that too feels limiting ad all of the hardware you want to fully control is only abstracted.

I would say that unless he has a really good reason why he wouldn’t want to go for dual boot, then he should do just that.

You mount them to /proc for extra spiciness

WTF, for the past 25 years, I thought /usr was short for /user, partially because of FreeBSDs preference for having user homes in /usr/home/*

Also, fuck /media. All of my (middle aged) homies hate /media

By promoting the distros that have this as a goal, such as Mint.

I would suggest Ubuntu in this category, but… eww…

Pretty much when you posted that, I found this in my dmesg:

[  715.744332] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[  715.965683] e1000e 0000:00:1f.6: The NVM Checksum Is Not Valid
[  716.008541] e1000e: probe of 0000:00:1f.6 failed with error -5

Just for the record, I compared modinfo up against lspci, and the PCI ID matches, so the driver should work. Is it possible to ignore the NVM checksum and try anyway? Because any tool I can find that communicates with the EEPROM on a hardware level is made for msdos.

Derp, I don’t think I ever did a modprobe. Anyway, I did an rmmod as I found out that there’s a newer version out, and I’m currently working on building the new version.

UPDATE: Newer version built, installed, and loaded.

I have not. In fact, I’d never even heard of it until you mentioned it.
But I sure as hell will give it a go now that I am aware of its existence. Thanks for the tip!

I too prefer GOG, but the fact that they still haven’t made a native linux port of GOG Galaxy causes me to mostly use Steam. I usually use GOG for indie stuff and thingsI want without it being tied to a launcher or DRM.

Oh, and I recently bought Rollercoaster Tycoon 2 there, as I felt it was about time I gave Chris Sawyer some money for all the fun the pirated version I downloaded 25 years ago have provided.

• Firefox
• mplayer (VLC is neat and all, I just prefer mplayer)
• vim
• screen
• nmap
• rsync

Shitloads more, but I seem to have misplaced my text file with the apt-get install blob that I always run on new systems. The above are what I can recall if I give the question 10 seconds of thought.

I have four identical machines. Each with the following set of disks:
2x NVMe
2x 2.5" SSD
4x 3.5" HDD in hardware RAID6

now, the device nodes for the SSDs and the RAID seems random. These populate /dev/sda through sdc, but which is which varies between the machines.

Is it possible to somehow reassign the device nodes so that I have the RAID show up as sdc on all machines?

I was thinking along the same lines. Use the online version available via portal.office.com, and use that to convert everything to something more FOSS-friendly.

Not sure if access is free, though.

I actually like that name, but it might be too close to the original for trademark comfort.

I for one really appreciate the effort of supporting non-AT drives despite the initial skepticism.