Mobile network not available

ghost_laptop@lemmy.ml · 1 month ago

no, i wanted to see if there was a solution before that but i might end up trying that since nothing seems to work

ghost_laptop@lemmy.ml · 2 months ago

Mobile network not available

ghost_laptop@lemmy.ml · 3 months ago

3D internet browser built with Godot Engine

ghost_laptop@lemmy.ml · 4 months ago

I managed to boot from the USB stick while running Mint in compatibility mode. I assume that if i burn and reinstall hopefully everything would be good if the hardware is working. Maybe I could fix it but I have no idea how to know whats wrong.

ghost_laptop@lemmy.ml · 4 months ago

Ill try this, but i also cannot boot into Mint which is what i have on my usb. Also i didnt installed zorin bur rather just added the harddrive from another pc for use and forgot to format it, ive been using ot for a while like this,l. Do you think this os still my issue?

ghost_laptop@lemmy.ml · 4 months ago

Linux doesnt. oot

ghost_laptop@lemmy.ml · 7 months ago

Hey, I replaced the cable and everything seems to be working fine, thank you!

ghost_laptop@lemmy.ml · 7 months ago

Hey, I replaced the cable and everything seems to be working fine, thank you!

ghost_laptop@lemmy.ml · 7 months ago

Issues with KDEnlive, can't import video

ghost_laptop@lemmy.ml · 7 months ago

I used journalctl -k -f and this is the output, I’ve also tried dmesg and smartctl and replied with the output on other comments, and all show some kind of I/O error, I guess I’m fucked or can it be because of a bad cable or something?

Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Sense Key : Illegal Request [current] 
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 Add. Sense: Unaligned write command
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#14 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 78 00 00 00 08 00 00
Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794616 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Sense Key : Illegal Request [current] 
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 Add. Sense: Unaligned write command
Apr 13 17:06:59 fedora kernel: sd 1:0:0:0: [sdb] tag#15 CDB: Read(16) 88 00 00 00 00 00 39 dd 26 b8 00 00 00 20 00 00
Apr 13 17:06:59 fedora kernel: I/O error, dev sdb, sector 970794680 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
Apr 13 17:06:59 fedora kernel: ata2: EH complete
Apr 13 17:19:28 fedora kernel: ata2.00: exception Emask 0x50 SAct 0x400 SErr 0x30802 action 0xe frozen
Apr 13 17:19:28 fedora kernel: ata2.00: irq_stat 0x00400000, PHY RDY changed
Apr 13 17:19:28 fedora kernel: ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
Apr 13 17:19:28 fedora kernel: ata2.00: failed command: READ FPDMA QUEUED
Apr 13 17:19:28 fedora kernel: ata2.00: cmd 60/00:50:38:e3:9d/01:00:39:00:00/40 tag 10 ncq dma 131072 in
                                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
Apr 13 17:19:28 fedora kernel: ata2.00: status: { DRDY }
Apr 13 17:19:28 fedora kernel: ata2: hard resetting link
Apr 13 17:19:31 fedora kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Apr 13 17:19:31 fedora kernel: ata2.00: configured for UDMA/33
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Sense Key : Illegal Request [current] 
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 Add. Sense: Unaligned write command
Apr 13 17:19:31 fedora kernel: sd 1:0:0:0: [sdb] tag#10 CDB: Read(16) 88 00 00 00 00 00 39 9d e3 38 00 00 01 00 00 00
Apr 13 17:19:31 fedora kernel: I/O error, dev sdb, sector 966648632 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 1
Apr 13 17:19:31 fedora kernel: ata2: EH complete

ghost_laptop@lemmy.ml · 7 months ago

It’s extremely long so I just copied a bit, but I see some errors regarding the ata bus I think.

[52308.201967] I/O error, dev sdb, sector 1028431352 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
[52308.201989] ata2: EH complete
[52308.289440] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen
[52308.289447] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52308.289449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52308.289452] ata2.00: failed command: READ FPDMA QUEUED
[52308.289454] ata2.00: cmd 60/e0:08:38:86:95/00:00:04:00:00/40 tag 1 ncq dma 114688 in
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52308.289459] ata2.00: status: { DRDY }
[52308.289462] ata2: hard resetting link
[52311.606437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52311.663188] ata2.00: configured for UDMA/33
[52311.663205] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52311.663209] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current] 
[52311.663211] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command
[52311.663214] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 04 95 86 38 00 00 00 e0 00 00
[52311.663216] I/O error, dev sdb, sector 76908088 op 0x0:(READ) flags 0x80700 phys_seg 28 prio class 2
[52311.663235] ata2: EH complete
[52311.917439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen
[52311.917447] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52311.917449] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52311.917452] ata2.00: failed command: READ FPDMA QUEUED
[52311.917454] ata2.00: cmd 60/20:a0:40:5a:87/00:00:cd:01:00/40 tag 20 ncq dma 16384 in
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52311.917460] ata2.00: status: { DRDY }
[52311.917463] ata2: hard resetting link
[52315.238437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52315.283121] ata2.00: configured for UDMA/33
[52315.283137] sd 1:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52315.283141] sd 1:0:0:0: [sdb] tag#20 Sense Key : Illegal Request [current] 
[52315.283143] sd 1:0:0:0: [sdb] tag#20 Add. Sense: Unaligned write command
[52315.283145] sd 1:0:0:0: [sdb] tag#20 CDB: Read(16) 88 00 00 00 00 01 cd 87 5a 40 00 00 00 20 00 00
[52315.283147] I/O error, dev sdb, sector 7743167040 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[52315.283162] ata2: EH complete
[52316.242431] ata2.00: exception Emask 0x50 SAct 0x10 SErr 0x30802 action 0xe frozen
[52316.242437] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52316.242439] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52316.242443] ata2.00: failed command: READ FPDMA QUEUED
[52316.242444] ata2.00: cmd 60/08:20:70:7c:7c/00:00:41:00:00/40 tag 4 ncq dma 4096 in
                        res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52316.242450] ata2.00: status: { DRDY }
[52316.242453] ata2: hard resetting link
[52319.558438] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52319.619535] ata2.00: configured for UDMA/33
[52319.619551] sd 1:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52319.619554] sd 1:0:0:0: [sdb] tag#4 Sense Key : Illegal Request [current] 
[52319.619557] sd 1:0:0:0: [sdb] tag#4 Add. Sense: Unaligned write command
[52319.619560] sd 1:0:0:0: [sdb] tag#4 CDB: Read(16) 88 00 00 00 00 00 41 7c 7c 70 00 00 00 08 00 00
[52319.619562] I/O error, dev sdb, sector 1098677360 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[52319.619581] ata2: EH complete
[52320.916451] ata2.00: exception Emask 0x50 SAct 0x8 SErr 0x30802 action 0xe frozen
[52320.916456] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52320.916459] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52320.916462] ata2.00: failed command: READ FPDMA QUEUED
[52320.916463] ata2.00: cmd 60/20:18:78:6d:f0/00:00:3c:00:00/40 tag 3 ncq dma 16384 in
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52320.916469] ata2.00: status: { DRDY }
[52320.916472] ata2: hard resetting link
[52324.238433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52324.280862] ata2.00: configured for UDMA/33
[52324.280878] sd 1:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52324.280883] sd 1:0:0:0: [sdb] tag#3 Sense Key : Illegal Request [current] 
[52324.280886] sd 1:0:0:0: [sdb] tag#3 Add. Sense: Unaligned write command
[52324.280889] sd 1:0:0:0: [sdb] tag#3 CDB: Read(16) 88 00 00 00 00 00 3c f0 6d 78 00 00 00 20 00 00
[52324.280891] I/O error, dev sdb, sector 1022389624 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 2
[52324.280915] ata2: EH complete
[52324.315439] ata2.00: exception Emask 0x50 SAct 0x100000 SErr 0x30802 action 0xe frozen
[52324.315445] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52324.315446] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52324.315449] ata2.00: failed command: READ FPDMA QUEUED
[52324.315451] ata2.00: cmd 60/08:a0:80:6d:f0/00:00:3c:00:00/40 tag 20 ncq dma 4096 in
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52324.315457] ata2.00: status: { DRDY }
[52324.315460] ata2: hard resetting link
[52327.606435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52327.667122] ata2.00: configured for UDMA/33
[52327.667141] ata2: EH complete
[52328.442437] ata2.00: exception Emask 0x50 SAct 0x80000 SErr 0x30802 action 0xe frozen
[52328.442443] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52328.442444] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52328.442447] ata2.00: failed command: READ FPDMA QUEUED
[52328.442448] ata2.00: cmd 60/00:98:90:6e:59/01:00:3d:00:00/40 tag 19 ncq dma 131072 in
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52328.442453] ata2.00: status: { DRDY }
[52328.442456] ata2: hard resetting link
[52331.758435] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52331.778679] ata2.00: configured for UDMA/33
[52331.778697] sd 1:0:0:0: [sdb] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52331.778701] sd 1:0:0:0: [sdb] tag#19 Sense Key : Illegal Request [current] 
[52331.778704] sd 1:0:0:0: [sdb] tag#19 Add. Sense: Unaligned write command
[52331.778707] sd 1:0:0:0: [sdb] tag#19 CDB: Read(16) 88 00 00 00 00 00 3d 59 6e 90 00 00 01 00 00 00
[52331.778709] I/O error, dev sdb, sector 1029271184 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
[52331.778733] ata2: EH complete
[52332.186438] ata2.00: exception Emask 0x50 SAct 0x2 SErr 0x30802 action 0xe frozen
[52332.186445] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52332.186447] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52332.186450] ata2.00: failed command: READ FPDMA QUEUED
[52332.186452] ata2.00: cmd 60/90:08:a0:91:1b/00:00:3a:00:00/40 tag 1 ncq dma 73728 in
                        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52332.186457] ata2.00: status: { DRDY }
[52332.186461] ata2: hard resetting link
[52335.502433] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52335.565114] ata2.00: configured for UDMA/33
[52335.565131] sd 1:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52335.565135] sd 1:0:0:0: [sdb] tag#1 Sense Key : Illegal Request [current] 
[52335.565138] sd 1:0:0:0: [sdb] tag#1 Add. Sense: Unaligned write command
[52335.565140] sd 1:0:0:0: [sdb] tag#1 CDB: Read(16) 88 00 00 00 00 00 3a 1b 91 a0 00 00 00 90 00 00
[52335.565142] I/O error, dev sdb, sector 974885280 op 0x0:(READ) flags 0x80700 phys_seg 18 prio class 2
[52335.565162] ata2: EH complete
[52335.733444] ata2.00: exception Emask 0x50 SAct 0x20 SErr 0x30802 action 0xe frozen
[52335.733450] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52335.733453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52335.733457] ata2.00: failed command: READ FPDMA QUEUED
[52335.733458] ata2.00: cmd 60/08:28:a0:91:1b/00:00:3a:00:00/40 tag 5 ncq dma 4096 in
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52335.733462] ata2.00: status: { DRDY }
[52335.733465] ata2: hard resetting link
[52339.054437] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52339.092930] ata2.00: configured for UDMA/33
[52339.092948] ata2: EH complete
[52339.311447] ata2.00: exception Emask 0x50 SAct 0x40 SErr 0x30802 action 0xe frozen
[52339.311455] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52339.311457] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52339.311461] ata2.00: failed command: READ FPDMA QUEUED
[52339.311462] ata2.00: cmd 60/00:30:00:fa:06/01:00:0b:00:00/40 tag 6 ncq dma 131072 in
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x50 (ATA bus error)
[52339.311469] ata2.00: status: { DRDY }
[52339.311472] ata2: hard resetting link
[52342.630429] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[52342.636897] ata2.00: configured for UDMA/33
[52342.636913] sd 1:0:0:0: [sdb] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=3s
[52342.636917] sd 1:0:0:0: [sdb] tag#6 Sense Key : Illegal Request [current] 
[52342.636919] sd 1:0:0:0: [sdb] tag#6 Add. Sense: Unaligned write command
[52342.636922] sd 1:0:0:0: [sdb] tag#6 CDB: Read(16) 88 00 00 00 00 00 0b 06 fa 00 00 00 01 00 00 00
[52342.636924] I/O error, dev sdb, sector 185006592 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 2
[52342.636947] ata2: EH complete
[52342.831443] ata2.00: exception Emask 0x50 SAct 0x2000 SErr 0x30802 action 0xe frozen
[52342.831450] ata2.00: irq_stat 0x00400000, PHY RDY changed
[52342.831453] ata2: SError: { RecovComm HostInt PHYRdyChg PHYInt }
[52342.831458] ata2.00: failed command: READ FPDMA QUEUED
[52342.831461] ata2.00: cmd 60/00:68:68:a5:1b/01:00:39:00:00/40 tag 13 ncq dma 131072 in
``

ghost_laptop@lemmy.ml · 7 months ago

It’s a bit long but here it is.

smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.7.11-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba X300
Device Model:     TOSHIBA HDWE140
Serial Number:    41IUK67JFBRG
LU WWN Device Id: 5 000039 abc58066c
Firmware Version: FP1R
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database 7.3/5528
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is:    Sat Apr 13 17:09:03 2024 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 481) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       464
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       11263
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       11051
 10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11259
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       8
192 Power-Off_Retract_Count 0x0032   083   083   000    Old_age   Always       -       8637
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       11332
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38 (Min/Max 16/59)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   253   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       0
222 Loaded_Hours            0x0032   073   073   000    Old_age   Always       -       11003
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       545
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

ghost_laptop@lemmy.ml · edit-2 7 months ago

Help with HDD

ghost_laptop@lemmy.ml · 11 months ago

Hyperplane: A non-hierarchical file manager

ghost_laptop@lemmy.ml · 3 years ago

Sure, but that would be the case if it was designed like that from the ground up, but BookWyrm’s developer didn’t and it’s understandable, so now you either fork it and make it like that or fork it and make it work specifically for whatever you want to keep track of.

ghost_laptop@lemmy.ml · 3 years ago

I asked them if it’s possible and they said yes if you modify the back end, but I don’t think they have time to maintain two projects like this. :/

If you get yourself a Python developer which isn’t that crazy you could do it though.

ghost_laptop

Moderates