A Reddit Refugee. Zero ragrets.

Engineer, permanent pirate, lover of all things mechanical and on wheels

moved here from lemmy.one because there are no active admins on that instance.

  • 7 Posts
  • 28 Comments
Joined 11 months ago
cake
Cake day: December 22nd, 2023

help-circle










  • It will not affect system stability, but… Surge protectors do not work at all without a ground wire to drop excess voltage to. Any kind of line voltage disturbance could kill every device.

    Additionally, without any ground wire to pull the housings of devices to ground, the potential for a short to energize the case and then electrocute you is also high.

    additionally additionally, if you have grounded outlets that don’t actually have a ground connection running to them, that means either the wiring system is broken or it was “updated” by an unlicensed hack job who has undoubtedly made numerous more dangerous decisions elsewhere in the circuit.

    If your house is entirely ungrounded you really should have an electrician come update it ASAP. Outlet grounds have been mandatory since 1971. The chances are high that wiring predating that code is still using old cloth-wrapped wire insulation or even knob&tube, both of which are huge fire risks as the insulation is decayed badly by now. It’s expensive to have all new wire pulled but it is necessary.



  • Don’t use a thumb drive, use an external hard/solid state drive or install an internal drive. Even an aliexpress 64gb ssd for $10 is better than any thumbdrive. Thumbdrive’s flash and controllers are not designed for OS level continuous writes and will die very quickly.

    If you must use a thumb drive, add some kind of air flow over it, and disable all logging features in openWRT to reduce writes as much as possible.



  • The absolute best bang for your buck new GPU’s for decode/encode are Intel ARC GPU’s. They use Intel’s Quick Sync Video system which is some of the best supported encode/decode libraries out there, and they’re cheap.

    An ARC A380 is easily had for $110, runs entirely off 75w PCIe slot power requiring no additional PSU wires, and supports H264/H265/AV1 encode. It’s a no brainer.

    As long as it physically fits the slot, it should not have an issue with the lower PCIe bandwidth. The lower end GPU’s really need very little even for video encode.





  • empireOfLove2@lemmy.dbzer0.comtoSelfhosted@lemmy.worldPost your Servernames!
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    1
    ·
    7 months ago

    The devices usually get some descriptor of what they look like…

    For example I have:

    • Flatboard - an old core2duo era Xeon bare tower server board I got on Craigslist for $20 that lives on a custom backplate and no case (thus, is flat)
    • OrangeBox - an Orange Pi 5 in a aptly-colored orange case I custom modeled and 3d printed for it
    • DumbBrick - my retired gaming PC built from a t30 dell tower server that is basically a nondescript black brick