That’s sort of how I’m understanding it, they’re talking about the build process specifically and want to re-base their toolset to BSD/Linux. Not sure what their current build process entails but like you said it could be they’re currently stuck with some sort of proprietary / Apple specific software.
No display at all? I suspect something else is at play there…
On that model during bootup
F2 = BIOS
F10 = Boot Menu
You should be seeing something in the Boot Menu, or at least be able to get into the BIOS?
Also double-check the USB formatting, I don’t remember if that NUC has UEFI boot support or if it needs to be enabled in the BIOS beforehand. e.g. if your USB is formatted to boot legacy then reformat it to boot in UEFI, or vice versa.
I actually have a few of those NUC models around but am not sure what it does exactly with no SSD, I think/thought it should still be able to handle USB boot in that situation.
Yup going to do that soon :)
Still on 4.x, bummer as I normally wait a while before doing major version software updates but it is what it is.
Has it been happening since qBittorrent 5.x ? Only reason I ask is that 5.0 did introduce a new feature per https://www.qbittorrent.org/news
FEATURE: Allow to move content files to Trash instead of deleting them (glassez)
Maybe double-check the qBittorrent settings and verify that isn’t somehow enabled? I’m not on on that version yet so can’t be sure how that new feature works or is configured.
If it’s not that then I suspect the other comments are right e.g. a hardlinked file elsewhere would defintiely mean you need to delete all the hardlinks to actually free up space.
they want to setup a server to host a simple “contact” website
Not sure what sort of uptime/reliability your friends are expecting out of a self hosted solution but for something like that you wouldn’t need much processing power, even a Raspberry Pi can host a simple website. Not sure what to recommend offhand but there are definitely vendors in that space that sell simple DIY “contact us” form software, or I guess if you wanted to roll your own that’s an option too. I’d be more concerned about keeping it locked down/secure.
Keep in mind for the internet your friends would likely need business class internet with multiple static IPs so you can give your little DIY box its own public IP address. Many (most?) residential internet service providers do not allow self hosting websites on their network and they’d be dynamic IP anyway though you could work around that somewhat with dynamic DNS since you’re going to need to purchase a domain name and point it to somewhere anyway.
run an e-mail service (about 10 accounts for now but with possibilities of expanding it to support more)
Like others said you really don’t want to go that route unless you’re well versed in that area. It would be annoying for a business especially a new one, those emails will likely keep going into other provider’s spam folders for a good period of time. All the big mainstream email providers are notorious for not trusting new email domains / new IP addresses.
Seems easier to just go to Google Workspace / Microsoft 365 / whatever other provider you like to use, presumably the business has a business use case for reliable email among other things.
Bonus: Those cloud services can easily host simple contact forms for you so maybe that’s your all in one solution. Look into Google Forms and similar.
and to store and remote access documents.
That sounds like the above commercial cloud solutions again :)
But sure technically you could go through the extra step hosting that yourself. Depends on how the business wants to use/access this stuff, it’s really a question for them. Could be as simple as a Windows server with RDP (if they’re Windows people & just want to log into something “windows” to browse/open files) or maybe multi-user Linux with VNC (the geeks might like, maybe not so much the general Windows/Mac users). Or if you’re trying to do something web oriented maybe something like Nextcloud if you want to do all this in a web browser.
You should triple check what exactly they are expecting when it comes to remote access documents… you really don’t want to spend the time setting up something that they totally weren’t expecting and end up hating.
I don’t think it’s possible, or at least not in the way you’re thinking. Encoding a video with lossless flags usually results in a file size bigger or about the same as the source, and on top of that it takes a long time to actually do the encode.
Video is already highly compressed.
But for sure you can tinker around with ffmpeg (FOSS) & see how it goes for you. I’ve done it in the past just for kicks since some of the common video codec encoders do have lossless flags but it really wasn’t worth the effort.
EDIT: That’s just the video in the file, you also have to contend with the audio. That’s a bit easier if you just want to use ffmpeg to dump everything into FLAC but again, I don’t think you’re saving much hard drive space if any.
Jellyfin should work fine for what you’re looking for. I haven’t run it on a Pi but it should work on that. You’ll be able to play music using the web ui as well as mobile apps if that’s your thing. It can also transcode on the fly so if your current browser/device/whatever can’t play .flac directly it’ll automatically transcode the playback to .mp3 or whatever it needs to be.
There are some other self hosted music/streaming projects you could take a look at that are much more built out for music playback specifically. Look into Airsonic-Advanced or Navidrome for example - I’ve been meaning to check them out myself but haven’t gotten around to it yet.
Should be fine, just don’t cheap out on the external drive / cable you will be using. And when you’re using something like smartctl you’ll know right away if SMART info is passing through your USB for proper testing.
I’ve done a lot of these type of scans via USB drives, honestly the more annoying part is that some USB drives do wonky things like go into sleep mode within 1-5 minutes which will disrupt any sort of scanning you had going. So with USB drive scanning I usually implement something to keep the drive alive and awake e.g. a simple infinite loop script to write a file every x seconds, or if you’re on windows you can also use KeepAliveHD.
is there anything you would recommend?
You’d need to donate via whatever means they accept donations, it’s not something you get to choose yourself. Unless you meant that you are going to keep contacting FOSS projects to ask them to set up new donation methods?
Personally I donate via crypto or other means that they allow donations via credit card (Liberapay / Ko-Fi work well IMO) . No Paypal/Venmo since I can’t use those services - some FOSS projects I don’t donate at all if they only accept Paypal.
True, wouldn’t be too different vs just using a VPN. You’re choosing to trust the Tribler tech and the Tribler exit node operator vs choosing to trust the VPN provider. Granted most VPN connections are going to have much better performance vs anything Tribler related.
There is a nice side effect of running an *arr stack against Tribler, even in 1 hop mode - Your Tribler node is much more easily pulling in new content into the Tribler network for other users to access afterwards without needing an exit node. Ideally it’s just one Tribler node/user needing to pull data through the exit nodes while the rest would just pull it from you and share with other nodes in-network.
Torrents over I2P work the same way. If the torrent data isn’t found within I2P and you have outproxies configured you could pull torrents from the clearnet & afterwards other I2P users just share amongst the I2P network.
That’s pretty cool, thanks for sharing! Been a while since I tried it out but last I looked Tribler’s own automation features were quite lacking so something like this helps a lot.
I was not able to download anything with more than 1 hops in between - ie it does hide your real IP address, but only uses one relay in between.
Hmm I don’t think there’s any relays at all in that configuration, unless you’re counting the exit node itself?
https://github.com/Tribler/tribler/issues/3067#issuecomment-325367047
One thing to keep in mind is that to download torrents from outside Tribler’s own network you would need to download through an exit node… not sure on the exact stats but last I tested exit nodes were only like 5-10% of the Tribler user base. For a while I tried volunteering my own VPN connection as an exit node for Tribler just to see how it went but the Tribler client kept locking up/crashing after a few days so the experiment did not go well… hopefully works better nowadays.
But, regardless, blocking any registrars that size the way you’re describing would break way more businesses and hurt the recipient provider’s own reputation.
Yeah I thought that too but when speaking with the email admin that was blocking Namecheap while figuring this out they had already decided it wasn’t worth trying to allow the 1% of valid emails vs the 99% spam emails they felt they received via Namecheap domains.
This honestly starting to sound more and more like a smear campaign
Smear against whom? I’m a Namecheap customer, just relaying my own experiences using them. Besides that quirk I like them fine as a registrar… I know it sounds dumb but I even renewed my domains there even after those email issues.
It’s fine, you don’t need to believe me as I said it’s just my own experience using Namecheap domains for emails. But you could just google around, you’ll see plenty of people discussing Namecheap & looking for solutions to block them (or solutions to successfully send emails with hem)… it’s not something I randomly made up if that’s what you’re implying.
e.g.
https://community.spiceworks.com/t/blocking-emails-based-on-registrar/816565
https://tacit.livejournal.com/608386.html
https://shkspr.mobi/blog/2021/05/why-do-scammers-love-namecheap/
https://www.reddit.com/r/NameCheap/comments/13t6fvm/namecheaps_private_email_is_blacklisted_by/
https://www.reddit.com/r/NameCheap/comments/wlb6vp/namecheap_making_it_too_easy_to_register_domains/
https://www.reddit.com/r/NameCheap/comments/tz4mkb/my_emails_are_always_going_in_the_spam_folder_of/
https://www.reddit.com/r/NameCheap/comments/ye358x/i_am_getting_a_ton_of_spam_scams_from_namecheap/
etc.
If you’re using Google Workspace, Google will give you the appropriate DMARC, DKIM and SPF records to add to your DNS. The NS themselves should resolve the records and provide the recipient server with the values you’ve entered, thereby ensuring delivery.
Sure. But why would that matter when you’re dealing with hostile 3rd party email providers that intentionally want to blackhole all email domains at Namecheap? But yes, just to clarify I do configure DMARC/DKIM/SPF and that works great for most cases.
I’m just describing what worked for me though in truth I don’t know exactly how these hostile email providers actually determine the domain is hosted at Namecheap. My hunch is that they are using a lookup & finding the nameserver for the domain & have already blacklisted Namecheap’s default free nameserver IP addresses. For whatever reason those same hostile email providers don’t seem to be blacklisting Namecheap’s paid nameserver but I think that sort of makes sense…
The larger issue is that Namecheap is known for cheap domains that scammers/spammers tend to buy in bulk & then use to spam with. Those same scammers/spammers aren’t trying to spend extra money so they only ever use the default free Namecheap nameservers.
If you use Namecheap for email domain(s) you may want to consider also splurging for their PremiumDNS to keep your domain(s) off spam blocks at other email providers.
I help maintain some emails at Gmail/Google Workspace but the domains themselves are at Namecheap. For a while there were complaints that some emails never landed in other people’s inboxes… this led me to talk about the issue with one of the email provider recipients based in the UK & apparently they were null routing anything coming from Namecheap since they felt a lot of spam came from them. But after some experimenting I figured out their system (& probably others) were figuring out they were Namecheap domains via the default FreeDNS they use. On a hunch I switched those domains over to PremiumDNS and after that all our emails were landing in other inboxes correctly. I guess maybe it makes sense, a typical spammer buying a cheap domain at Namecheap isn’t going to splurge for the higher end DNS service for it.
I’m not saying all email providers treat Namecheap domains as spam but just be warned there definitely ones out there that do.
Bummer, the formfactor / specs look okay but it’s kind of a dead end if I can’t just install & use a vanilla Debian OS or similar.
With all the NAS OS options probably Synology has the best one but even there I don’t actually want to get locked into that. I doubt this UGOS software can match Synology’s let alone Debian.
If it’s any consolation it looks like UGREEN is responding to comments about installing other OSes at their kickstarter page https://www.kickstarter.com/projects/urgreen/ugreen-nasync-next-level-storage-limitless-possibilities/comments
Yup there’s at least a few projects that can do in browser file transfer using WebRTC e.g.
https://sendfiles.dev/
https://sharedrop.io/
https://github.com/kern/filepizza
And of course https://github.com/magic-wormhole/magic-wormhole (they used to have a website too but maybe that went away?)