The Linux mint installer has an option built-in to create a dualboot. Just follow their guide and be sure to select “install alongside windows 10” at step 5.

Unless your initial recordings were lossless (they probably weren’t), recompressing the files with a lossless flag will only increase the size by a lot. Lossless video is HUGE, which is why almost no one actually records/saves it. What you’re probably looking for is visually lossless transcoding, where you do lose some data, but the difference is too small for most people to notice.

My recommendations:

1. Go to your recording software and change the setting to better compress your videos the first time around. Compressing once generally gives a better quality to size ratio than compressing twice. It’s therefore best if your recording software get it right first time, without you having to keep on recompressing your videos.
2. When tinkering with encoding setting, trying to find what works best for you, it might be useful to install Identity to help you compare the original files and one or more transcoded version(s).
3. Don’t try to recompress the audio; you’ll save very little space, and the losses in quality become perceptible much faster than video. When using ffmpeg, the “-c:a copy” flag should simply copy the original audio to the new file, without any change in quality or size
4. I’d recommend taking some time to read through the ffmpeg encoding guides. H265 and AV1 are good for personal archiving, with AV1 providing better compression ratios at the cost of much slower encoding. You could also choose VP9, which is similar in compression ratio and encoding speed to h265.
5. You’ll have to choose between hardware and software encoding. Hardware encoding can (depending on your specific hardware and settings) be 10-100x faster than software, but software generally gives better compression ratios at similar qualities. You should test this difference for yourself and see if the extra time is worth it for the extra quality. Do keep in mind that AV1 hardware encoding is only supported by some of the most recent GPU’s (rx7000 and rtx4000 from the top of my head). If you don’t have one of those GPU’s, you’ll either have to choose software encoding or pick a different codec.

Luxury! My homeserver has an i5 3470 with 6GB or RAM (yes, it’s a cursed 4+2 setup)! </badMontyPythonReference>

Interesting, I also run Nextcloud and pihole, and vaultwarden, jellyfin, paperless-ngx, gitea, vscode-server and a minecraft server (every now and then).

You’re right that such a system really does show its age, but only when doing multiple intensive tasks at the same time. I try not to backup my photos to Nextcloud while running minecraft, for example, as the imagine identification task pins my CPU at 100%. So yes, I agree, you’re probably not doing anything out of the ordinary on your setup.

The point I was trying to make still stands though, as that pi 2B could run more than I would’ve expected beforehand. I believe it once even ran jellyfin, a simple file server, samba, and a webserver with a simple HTML website. Jellyfin worked just fine, as long as the pi didn’t have to transcode (never got hardware transcoding to work).

It is funny that you should run out of memory, seeing as everything fits (albeit, just barely) on my machine in 1/5 the memory. Would de overhead of running VM’s account for such a large difference?

Coming from someone who started selfhosting on a pi 2B (similar-ish specs), you’d be surprised. If you don’t need anything fast or fancy, that 1GB will go a long way, and plenty of selfhosted apps require very little CPU. The only real problem I faced was that all HTTPS-related network tasks were limited at ~3MB/s, as that is how fast my pi could encrypt the data (presumably, I just saw my webserver utilising the entire CPU and figured this was the most likely explanation)

I’ve had good experiences with whisper.cpp (should be in the AUR). I used the large model on my GPU (3060), and it filled 11.5 out of the 12GB of vram, so you might have to settle for a lower tier model. The speed was pretty much real time on my GPU, so it might be quite a bit slower on your CPU, unless the lower tier models are also a lot faster (never tested them due to lack of necessity).

The large model had pretty much perfect accuracy (only 5 or so mistakes in ~40 pages of transcriptions), and that was with Dutch audio recorded on a smartphone. If it can handle my pretty horrible conditions, your audio should (hopefully) be no problem to transcribe.

It depends what you’re optimising for. If you want a single (relatively small) download to be available on your HDD as fast as possible, then your current setup might be better (optimising for lower latency). However, if you want to be maxing out your internet speeds at all time and increase your HDD speeds by making the copy sequential (optimising for throughput), then the setup with the catch drive will be better. Keep in mind that a HDD’s sequential write performance is significantly higher than its random write performance, so copying a large file in one go will be faster than copying a whole bunch of random chunks in a random order (like torrents do). You can check the difference for yourself by doing a disk benchmark and comparing the sequential vs random writes of your drive.

qBittorrent has exactly the option you’re looking for, I believe it’s called “incomplete download path” in the settings, letting you store incomplete downloads at a temporary path and moving them to their regular location when the download finishes. Aside from the download speed improvement, this will also lead to less fragmentation on your HDD (which might be part of the reason why it is so slow when downloading directly to it). Pre-allocating space could have the same effect, but I would recommend only using one of these two solutions at once (pre-allocating space on your SSD would only waste space)

I have about 0 experience with openssl, I just looked at the man page (openssl-enc). It looks like this command doesn’t take a positional argument. I believe the etcBackup.key file isn’t being read, as that command simply doesn’t attempt to read any files without a flag like -in or -out. I could be wrong though, see previously stated inexperience.

Dutch media are reporting the same thing: https://nos.nl/l/2529468 (liveblog) https://nos.nl/l/2529464 (Normal article)

That seems like a good edit, and fair enough. Good to know that there is also room for people who want to use their computer in a non-fanatical way, simply minding our own business.

I don’t fit in an of these teams, and neither do literally all Linux users I know. Should we have identity crises, or could this be a giant oversimplification?

Which compression level are you using? My old server is able to compress flac’s at the highest (and therefore “slowest”) compression level at >50x speed, so bumping the level up shouldn’t be too hard on your CPU.

I’ve been running some external drives on my server for about a year now. In my experience, hard drives with an external power supply suffer less from random disconnects. The specific PC also makes quite a large difference in reliability. My server is just a regular desktop and has very little problem staying connected and powering my 3 external drives. My seedbox is an old laptop, and has been having almost constant problems with random disconnects and power issues. Maybe test how well your framework does with some external drives before committing to the plan?

To change the ownership of the files, you should only have to run sudo chown -R user:group directory. -R makes chown run recursively, so it will modify the directory and all subdirectories and files. Do note that changing the ownership to plex:plex or something similar would leave your user unable to normally modify the files. My solution to this was to add both my regular user and the plex (in my case jellyfin) user to the same group. That way both users can easily see and modify the files, as long as the group has read/write permissions (the 2nd column of rwx in ls -Al). If necessary, you can add group permissions with sudo chmod -R g+rw directory.

On a side note: have you considered using jellyfin? It’s a completely free alternative to plex, which recently received a truly massive update with tons of new features. Some people prefer plex’ overall experience, but I’ve been running jellyfin with almost no complaints.

Small disclaimer: I’m writing from mobile, so the commands might not be 100% correct. Run at your own risk, and NEVER POINT A CHMOD/CHOWN COMMAND AT SYSTEM DIRECTORIES LIKE / OR /USR. That’s one of the easiest ways to completely break your system.

didn’t know that was a part of bisexuality

I should probably flee before I get eaten by an army of blahåjar (apparently that’s the correct plural?)

Oh I don’t mind the nitpicking, thanks for the explanation! I (apparently erroneously) thought “demake” and “decompile” were synonyms. Guess I’m one of today’s 10000.

In that case the (now taken down, but forked a gazillion times) portal64 project would be a correct example of a demake, right?

interested in females

Username checks out, though I’m assuming you meant “demakes”?

Anyways, the demake I’m most familiar with is the in-progress Lego island. The YouTuber behind it documented part of the process in vlogs (linked on the GitHub page), so that might be an interesting starting point.

I tried using Linux alternatives to iTunes, but it was always a pain. Even iTunes itself on a separate windows box was more of a hassle than I wanted. I eventually discovered rockbox, which works great with my iPod (5th gen AKA video): it has way more config options and allows me to simply create .m3u playlists and use my own folder structure. If your iPod is supported (https://www.rockbox.org/wiki/IpodPort.html), I’d absolutely recommend Rockbox over other solutions.

If your iPod isn’t supported by Rockbox (like my nano 5th gen), you could probably use strawberry or GTKpod. Both are imperfect, but work “good enough”.