I’ve been using Handy STT for a while now. I have it set as Super S and depending on the app, it starts spamming the S key over and over.

There’s probably more alternatives if you don’t like this one. https://alternativeto.net/software/handy-stt/?platform=linux

From my understanding, some older GPUs don’t support frame gen and upscaling. some older games don’t have native frame gen or scaling support built in.

Elementary os cursor

Any good cheap VPS for something like Netbird server or Headscale with servers available in the United States.

https://librewolf.net/docs/faq/#should-i-allow-canvas-access-how-do-i-do-it

You most likely need to enable Canvas support on that site for the upload. It’s a little picture icon right to the left of the URL bar. I would recommend reading the docs above.

Here, you dropped this: /*

Oh, I didn’t notice.

$ du -hsc /boot/*
927M    /boot/8e894020c9ab48be8cae43e3b9a5598f
300K    /boot/amd-ucode.img
820K    /boot/EFI
4.0K    /boot/limine.conf
4.0K    /boot/limine.conf.old
180K    /boot/limine-splash.png
4.0K    /boot/System Volume Information
928M    total

$ du -hsc /boot/8e894020c9ab48be8cae43e3b9a5598f/*
12K     /boot/8e894020c9ab48be8cae43e3b9a5598f/limine_history
333M    /boot/8e894020c9ab48be8cae43e3b9a5598f/linux-cachyos
262M    /boot/8e894020c9ab48be8cae43e3b9a5598f/linux-cachyos-lts
333M    /boot/8e894020c9ab48be8cae43e3b9a5598f/linux-cachyos-rt-bore
927M    total

  ~   
❮ sudo du -hsc /boot
928M    /boot
928M    total
  ~  
❮ sudo snapper list-configs
Config │ Subvolume
───────┼──────────
root   │ /
  ~ 
❮ sudo du -hsc /.snapshots/
237G    /.snapshots/
237G    total
  ~ 
❮ df -h
Filesystem      Size  Used Avail Use% Mounted on
dev              16G     0   16G   0% /dev
run              16G  2.6M   16G   1% /run
efivarfs        128K   69K   55K  57% /sys/firmware/efi/efivars
/dev/nvme1n1p2  930G  599G  327G  65% /
tmpfs            16G     0   16G   0% /dev/shm
none            1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
none            1.0M     0  1.0M   0% /run/credentials/systemd-resolved.service
/dev/nvme1n1p2  930G  599G  327G  65% /srv
tmpfs            16G  140K   16G   1% /tmp
/dev/nvme1n1p2  930G  599G  327G  65% /var/tmp
/dev/nvme1n1p2  930G  599G  327G  65% /root
/dev/nvme1n1p2  930G  599G  327G  65% /home
/dev/nvme1n1p2  930G  599G  327G  65% /var/cache
/dev/nvme1n1p2  930G  599G  327G  65% /var/log
/dev/nvme1n1p1  2.0G  928M  1.1G  46% /boot
tmpfs           3.1G  1.2G  2.0G  38% /run/user/1000
❮ sudo btrfs fi usage /.snapshots/
Overall:
    Device size:                 929.51GiB
    Device allocated:            765.50GiB
    Device unallocated:          164.01GiB
    Device missing:                  0.00B
    Device slack:                  3.00KiB
    Used:                        597.92GiB
    Free (estimated):            326.24GiB      (min: 244.23GiB)
    Free (statfs, df):           326.23GiB
    Data ratio:                       1.00
    Metadata ratio:                   2.00
    Global reserve:              512.00MiB      (used: 0.00B)
    Multiple profiles:                  no

Data,single: Size:754.01GiB, Used:591.78GiB (78.49%)
   /dev/nvme1n1p2        754.01GiB

Metadata,DUP: Size:5.74GiB, Used:3.07GiB (53.47%)
   /dev/nvme1n1p2         11.47GiB

System,DUP: Size:8.00MiB, Used:112.00KiB (1.37%)
   /dev/nvme1n1p2         16.00MiB

Unallocated:
   /dev/nvme1n1p2        164.01GiB

Then what’s taking up all the space?

I don’t have even the slightest idea of what is take up all the space. My main problem isn’t that the snapshot feature isn’t work but the fact that I don’t know why its saying 85% of the boot partition has been usage up is my main concern. Just like you said I could just increase the size of the partition but that might just delay my issue until later and then I would have the same issue but twice the size.

Remove old entries youve created with this tool,

what tool?

There’s no reason you should have a ton of different boot entries to snapshots.

limine-snapper-info says I have 0 snapshots out of 8.

❮ sudo snapper list
# │ Type   │ Pre # │ Date │ User │ Cleanup │ Description │ Userdata
──┼────────┼───────┼──────┼──────┼─────────┼─────────────┼─────────
0 │ single │       │      │ root │         │ current     │

I’m fairly sure that the new controller uses TMR instead of Hall Effect joysticks.

My guess is 80 USD.

I bought a 8 bitdo ult 2 and a 2 c both are great. My only problem is that I wished that the USB stick support multiple controls like the 8 controllers thr Xbox wireless adapter.

Donating. You could also try getting your workplace to also donate as well.

ImageMagick does support displaying images but it only supported when you use x11 (Xwayland).

# the `display` command will give you a missing error even if you have ImageMagick installed (At least on my winget installation of ImageMagick)
display image.png
# give you a x11 error on windows
magick display image.png

if for some reason you want something similar you could use ffplay it both supported on windows and x11 from what I know.

I tried it for batch conversion and I was very disappointed it somehow skipped files on big batches

I haven’t had any issues with ImageMagick with converting images, but I would rather use a dedicate command for encoder like avifenc, cjxl, cjpegli, and cwbep, since they have more options than ImageMagick or utilize newer encoders, such as cjpegli.

dua i

ShareX is one of the few things I missed when I switched from using Windows.

Can someone explain the difference between this and Briar?

Would something like ‘doas’ have the same issue?

I just tried it like a week ago. It’s pretty stable, at least on my system. The only thing that I notice is the lack of features in the app itself.

It did make modding Stardew Valley a bit easier.

Any difference between croc and this?

Thanks it worked. I installed both mfc140 and vcrun2022, I don’t know which one did the trick.

I’m getting suck on a black screen. I have tried proton-GE and proton experimental. I have also tried vulkan and without.

What should I try next?

Kernel: Linux 6.14.2-arch1-1
nvidia: 570.133.07
DE: KDE Plasma 6.3.4
WM: KWin (Wayland)